S54.15-4611-08
1 | Fuse and relay module | 4 | Electrical connectors | |
2 | Bolts | 5 | Electrical connectors | |
3 | Bracket |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove glove box | ||
3 | Disconnect electrical connectors (4) at fuse and relay module (1) | ||
4 | Remove screws (2) and take fuse and relay module (1) with holder (3) off crossmember until electrical connectors (5) are accessible | Installation: Ensure holder (3) is correctly seated at crossmember. | |
5 | Disconnect electrical connectors (5) and remove fuse and relay module (1) with holder (3) | ||
6 | Install in the reverse order |