AR54.10-W-0041A | Remove/install EMERGENCY OFF switch on right of frame | 15.2.12 |
MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (E06) Electrical system for hazardous goods vehicles (GGVS)
W54.10-0013-01
1 Securing bolts
2 Electrical line (to EMERGENCY OFF switch on right of frame)
3 Bracket (for EMERGENCY OFF switch on right of frame)
4 Gland screw connection
S109 Right frame EMERGENCY OFF switch
| Remove/install | ||
1 | Switch off ignition | ||
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
2 | Disconnect ground lead from battery | ||
| Notes on battery | ||
3 | Loosen gland screw connection (4) | Installation: The gland screw connection (4) must close watertight. | |
4 | Remove EMERGENCY OFF switch on right of frame (S109) | ||
5 | Open EMERGENCY OFF switch on right of frame (S109) | Installation: Pay attention to switch housing seal | |
6 | Remove electrical line (2) | ||
7 | Install in the reverse order | ||
8 | Perform function test on electrical system | ||
9 | Set time on tachograph |