1 | Bolts |
2 | Bracket |
3 | Vent hose |
4 | Ground cable |
5 | Positive line |
6 | Right seat frame |
7 | Entrance paneling |
G1 | On-board electrical system battery |
S54.10-4610-04
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Notes on battery | ||
| Remove/install | ||
1 | Detach ground line (4) of on-board electrical system battery (G1) | ||
2 | Remove screws/bolts (1) and remove bracket (2) | ||
3 | Detach vent hose (3) from on-board electrical system battery (G1) | Installation: | |
4 | Pull on-board electrical system battery (G1) out of guide under right seat base (6) and place on door sill trim (7) | ||
5 | Remove positive terminal cover | ||
6 | Disconnect positive line (5) of on-board electrical system battery (G1) | Installation: | |
Bolt, positive line to positive terminal of on-board electrical system battery/additional battery | |||
7 | Remove on-board electrical system battery (G1) | ||
8 | Install in the reverse order |