P54.10-2257-09
Shown on vehicle up to 31.5.06 |
1 | Ground cable | 5 | Cover | 8 | Bracket | ||
2 | Positive terminal cover | 6 | Vent hose | 9 | Retaining strap | ||
3 | Nut | 7 | Screw | G1 | Battery | ||
4 | Positive line |
| Remove/install | ||
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
Topical note | Notes on battery | ||
1 | Disconnect ground line (1) of battery (G1) |
| |
Model 211.6 | |||
2 | Remove cover from positive terminal (2) | ||
3 | Release nut (3) and remove positive line (4) from battery (G1) | Installation: | |
4 | Unclip cover (5) and detach vent hose (6) | ||
5 | Remove screw (7) and remove holder (8) | ||
6 | Release retaining strap (9) and remove battery (G1) with support bracket from load compartment | Installation: Ensure that battery (G1) is seated correctly in spare wheel well. | |
7 | Install in the reverse order |