AR54.10-P-0005RB | Remove/install battery | 15.2.12 |
MODEL 230.4 except CODE (P99) Special model "AMG Black Series"
starter battery
P54.10-2122-04
1 Ground cable
2 Positive line
3 Cover for positive terminal
4 Retaining clip
5 Vent grille
G1/4 Starter battery
| Remove/install | ||
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
| Notes on battery | ||
1 | Disconnect ground line from the on-board electrical system battery and ground line (1) from the starter battery (G1/4) | ||
2 | Remove ventilation grille (5) on air inlet | Unclip both catch hooks on the vent grille (5). | |
3 | Remove retaining bracket (4) | ||
4 | Remove positive terminal cover (3) | ||
5 | Slacken nut and disconnect positive line (2) from starter battery (G1/4) | Installation: Ensure that the positive line (2) is seated firmly, otherwise the positive terminal may be damaged. | |
6 | Remove starter battery (G1/4) | If the starter battery (G1/4) is replaced, the venting reservoir must be modified. | |
7 | Install in the reverse order |