Remove/install battery

AR54.10-P-0005EQ

Remove/install battery

02.04.2020

Model

293

Modification notes

17.03.2020

"Scan QR code on on-board electrical system battery", added.

Operation step 2

Shown on model 293.### #1

1

Ground cable

2

Screw

3

Bracket

4

Vent hose

5

Cover

6

Positive line

G1

On-board electrical system battery

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Disconnect ground line (1) from on-board electrical system battery (G1).

AR54.10-P-0003EQ

2

Scan QR code on on-board electrical system battery(G1), confirm change of on-board electrical system battery (G1) using diagnostic system and fill out test log.

When replacing on-board electrical system battery (G1) after check.



AD00.00-P-2000-06FR


Non-observance will lead to an incorrect or not accurate charging characteristic.
As a result, the on-board electrical system battery (G1) may be damaged.

 2D Hand scanner

*000589086300

3

Unscrew screw (2) of holder (3) until on-board electrical system battery (G1) can be removed.

 Screw/bolt, battery mounting rail to battery frame

*BA54.10-P-1001-01M

4

Disconnect vent hose (4) from on-board electrical system battery (G1).

 Installation:
Check that the vent hose (4) is correctly seated.
Otherwise leaking battery vapor may damage the vehicle.

5

Remove cover (5).

6

Disconnect positive line (6) of on-board electrical system battery (G1).

 Nut, electrical line to negative terminal/positive terminal of on-board electrical system battery

*BA54.10-P-1003-01M

7

Remove on-board electrical system battery (G1).

8

Install in the reverse order.

 Battery

Number

Designation

Model 293

BA54.10-P-1001-01M

Screw/bolt, battery mounting rail to battery frame

Nm

23

 Battery

Number

Designation

Model 293

BA54.10-P-1003-01M

Nut, electrical line to negative terminal/positive terminal of on-board electrical system battery

Nm

6