AR54.10-M-0007A | Remove/install additional battery | 15.2.12 |
MODEL 905.613
Minibus Sprinter low floor 6 t,
with hydraulic lowering system at the front axle
M68.30-0009-11
1 Cover
2 Floor panel
M54.10-0022-11
3 Additional battery
4 Venting hose
5 Positive line
6 Bracket
7 Ground line
| Remove/install | ||
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
| Notes on battery | ||
1 | Switch off hydraulic lowering system | ||
2 | Remove cover (1) of additional battery (3) | ||
3 | Detach ground line (7) from additional battery (3) | ||
4 | Detach positive line (5) from additional battery (3) | ||
5 | Disconnect vent hose (4) from additional battery (3) | ||
6 | Remove both brackets (6) | ||
7 | Remove additional battery (3) | If the additional battery (3) which has been removed has to be disposed of, observe disposal regulations: | |
| Dispose of battery | ||
8 | Install in the reverse order |