1 | Temperature sensor |
2 | Electrical connector |
3 | Electrical wiring harness |
4 | Diesel particulate filter |
S49.20-A091-06
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove right front wheel. | ||
2 | Remove right front fender liner. | ||
3 | Remove electrical connector (2). | Installation: Check retaining clips for damage. | |
If the retaining clip is damaged, | |||
| |||
Replace damaged retaining clip. | |||
4 | Disconnect electrical connection (2). | ||
5 | Expose electrical wiring harness (3). | ||
6 | Remove temperature sensor (1) from diesel particulate filter (4). | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Installation: Coat the thread of the temperature sensor (1) with heat-resistant lubricant. | |||
Exhaust temperature sensor at diesel particulate filter | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench socket | |||
7 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Perform engine test run and check leak tightness of the exhaust system in the area of the temperature sensor (1). | Visual inspection only. |
000 589 77 03 00
Box wrench socket