Shown on engine 900 |
1 | Injection line |
2 | Heat shield |
G14.40-3164-01
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Notes on use, material properties and handling of AdBlue® | |||
| Remove/install | ||
1 | Remove injection line (1). | Seal bores with a suitable stop plug. | |
Installation: Replace injection line (1) after each removal. | |||
Union nut, injection line to injection nozzle | |||
Union nut, injection line to metering device | |||
2 | Install in the reverse order |