Remove/install exhaust gas temperature sensor downstream of SCR catalytic converter

AR49.20-B-1030EVI

Remove/install exhaust gas temperature sensor downstream of SCR catalytic converter

05.11.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

1

Electric wire

2

Electrical connector

3

Exhaust gas after-treatment unit

B73

Temperature sensor of the exhaust gases after the SCR catalytic converter

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Turn off ignition

2

Loosen the electric line (1)

3

Separate the electric connector (2)

4

Remove the temperature sensor of the exhaust gases after the SCR catalytic converter (B73)

 Installation: Grease the thread of the temperature sensor of the exhaust gases after the SCR catalytic converter (B73) lubricant.

Paste, hot lubrication 1 kg, DBL 6879.20

*BR00.45-Z-1005-06A

 Exhaust gas temperature sensor on exhaust gas aftertreatment unit

*BA49.10-B-1006-02EVI

5

Install in reverse order

 Exhaust system

Number

Designation

ENGINE 936.9

BA49.10-B-1006-02EVI

Exhaust gas temperature sensor on exhaust gas aftertreatment unit

Nm

30

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DBL 6879.20

A 000 989 76 51