S49.10-4556-07
1 | Nuts | 4 | Elastomer bearing | |
2 | Elastomer bearing | 5 | Elastomer bearing | |
3 | Elastomer bearing | 6 | Rear muffler |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Raise vehicle | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Unscrew nuts (1) | Nut, rear muffler to center muffler | |
3 | Remove elastomer bearings (2, 3, 4, 5) from vehicle and remove rear muffler (6) | Aid of helper required. | |
Installation: Replace seal at flange connection. | |||
Bolt, bracket for elastomer bearing for rear muffler to body | |||
4 | Check elastomer bearings (2, 3, 4, 5) for wear and damage | In case of a complaint | |
| |||
Replace relevant elastomer bearing (2, 3, 4, 5). | |||
5 | Install in the reverse order | ||
| Check | ||
6 | Check installation position and clearance of rear muffler (6), correct installation position if necessary | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform an engine test run and check exhaust system for leaktightness |