1 | Electrical connection |
2 | Cable tie |
3 | Gas line connection |
4 | Threaded connection |
5 | Liquid phase solenoid valve |
6 | Removal line connection |
7 | Screw/bolt |
D47.25-1117-06
Danger ! | Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas. | Remove any sources of ignition. | |
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | ||
| Remove/install | ||
1 | Empty drain line | ||
2 | Cut cable tie (2) | Installation: Replace cable tie (2). | |
3 | Release and disconnect electrical connection (1) | ||
4 | Detach gas line connection (3) | Gas line to reducer | |
5 | Detach threaded connection (4) | ||
6 | Detach removal line connection (6) on liquid phase solenoid valve (5) | Union nut, drain line to liquid phase solenoid valve | |
7 | Remove screw/bolt (7) and liquid phase solenoid valve (5) | Bolt, liquid phase solenoid valve to bracket | |
8 | Install in the reverse order | ||
9 | Perform GAP |