AR47.20-B-5520A | Remove/install gasket on fuel filter module | 12.02.16 |
Cumbustion engine 372.9, 374.9, 376.9, 377.9
B07.00-0022-11
1 Filter
2 Water drain
3 Inlet piping of the filter feeding pump
4 Banjo fitting in the feeding pump
5 Banjo fitting in the injection pump inlet
6 Outlet piping of the filter injection pump
7 Banjo fittings for inlet and outlet of the filter piping
8 Screws for fastening the filter to the support
9 Engine mount
10 Vent valve (air drain)
11 Feeding pump handle
| Remove and install | ||
Danger! | Safety measures to deal with fuel | ||
1 | Loose the banjo fittings (4), (5) and (7) and remove the inlet (3) and outlet (6) pipings | Install: Use brand-new sealing washers in the banjo fittings. | |
| |||
2 | Remove the screws (8) and remove the whole filter (1) | | |
3 | Install in reverse order | Install: When you are done with the installation, loose one or two turns of the vent valve (drain) (10) in the upper part of the cylinder head and manipulate the feeding pump handle (11) until the fuel flows from the vent valve without air bubbles. Then, press manually the vent valve, activate the engine and check if the feeding system is not leaking. |
Diesel injection system
Número | Denominação | Engine 372.9, 374.9, 376.9, 377.9, 386.9 | |||
BA07.11-B-1006-01A | Fastening of fuel line | Nm | 35 | ||
Fuel filter