AR47.10-W-7000C | Remove/install fuel level sensor | 17.6.09 |
MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2
W47.10-1036-11
1 Fuel line (return flow)
2 Fuel line (feed)
3 Vent line
4 Securing clamp
5 Electrical connector
6 Fuel line (auxiliary heater)
B22 Fuel fill level sensor
W47.10-1035-06
7 Measuring lever
B22 Fuel fill level sensor
Modification notes
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Switch off ignition | ||
2 | Disconnect electrical connector (5) on fuel fill level sensor (B22) | ||
3 | Remove securing clamp (4) | ||
4 | Remove fuel lines (1, 2) as well as the vent line (3) from fuel fill level sensor (B22) | Mark fuel lines (1, 2) and catch escaping fuel in a suitable safety container. | |
Installation: Observe identification of fuel lines (1, 2). | |||
5 | Remove fuel line (6) | Only on vehicles with auxiliary heater. | |
6 | Unlock fuel fill level sensor (B22) and pull out of the fuel tank | To unlock, turn the fuel fill level sensor (B22) counterclockwise. | |
Pull out fuel fill level sensor (B22) upwards very carefully. Otherwise, the measuring lever (7) consisting of thin wire and the measuring electronics connected can be damaged.. | |||
Installation: Replace sealing ring and carefully install fuel fill level sensor (B22) in the fuel tank. | |||
| Fuel fill level sensor modified | Only applies to model 930, 932, 933, 934 | |
7 | Install in the reverse order |