AR46.80-W-1300A | Relieve pressure in hydraulic system | 21.4.08 |
MODEL 957.65 with CODE (AN8) Hydraulically steered leading axle
MODEL 957.66 with CODE (AN9) Hydraulically steered trailing axle
W46.80-1001-11
1 Pressure relief valve (basic body)
2 Jam nut
3 Pressure screw
4 Protective cap
Y67 Hydraulic control block
| Removing | ||
1 | Remove protective cap (4) | ||
2 | Open pressure relief valve (1) | To do so, loosen the jam nut (2) and unscrew the pressure screw (3) by one to two turns. Do not loosen the main body of the pressure relief valve (1). | |
| Install | ||
3 | Close pressure relief valve (1) | To do so, screw in the pressure screw (3), then counterhold and tighten the jam nut (2). | |
| |||
4 | Press on protective cap (4) |
Auxiliary steering axle (ZL)