Modification notes
5.10.06 | Self-locking nut, tie rod to steering knuckle | Model 240 | |
Self-locking nut, track rod to steering idler arm | |||
Self-locking nut, track rod to steering gear pitman arm |
Tie rod
Number | Designation | Model | ||
BA46.40-P-1001-01G | Self-locking nut, tie rod to steering knuckle | Stage 1 | Nm | 35 |
Stage 2 | ° | 60 | ||
BA46.40-P-1002-01G | Self-locking nut, track rod to steering idler arm | Stage 1 | Nm | 35 |
Stage 2 | ° | 60 | ||
BA46.40-P-1003-01G | Self-locking nut, track rod to steering gear pitman arm | Stage 1 | Nm | 35 |
Stage 2 | ° | 60 | ||
140 589 00 33 00
Puller
Thrust piece
129 589 10 63 00
P46.40-2043-08
Pushing off
1 Unscrew self-locking nut of tie rod joint (10a).
2 Screw thrust piece (043a) onto tie rod joint (10a).
3 Use puller (046) to pry tie rod joint (10a) off steering knuckle (5), steering gear pitman arm or steering idler arm.
Do not damage rubber boot (10b) of tie rod joint (10a).
4 Remove puller (046) and thrust piece (043a).
Attaching
5 Clean taper on the tie rod joint (10a) and steering knuckle (5), steering gear pitman arm or steering idler arm.
The conical joint must be free of oil and grease.
6 Fit tie rod joint (10a) in steering knuckle (5), steering gear pitman arm or steering idler arm.
7 Replace and tighten self-locking nut of tie rod joint (10a) .