S46.30-4526-79
1 | Front wheel | 4 | Banjo bolt | 7 | Clip | ||
2 | Fender liner | 5 | Hydraulic line | 8 | Hydraulic hose | ||
3 | Poly-V-belt | 6 | Power steering pump | 9 | Bolts |
Warning | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
| Remove/install | ||
1 | Remove noise damper upstream of charge air cooler. | ||
2 | Extract hydraulic fluid from hydraulic fluid reservoir of power steering system. | Hand pump | |
3 | Remove front wheel (1). | ||
4 | Remove fender liner (2). | ||
5 | Slacken poly-V-belt (3) and remove from power-steering pump. | ||
Poly-V-belt routing diagram | |||
| Pin for locking poly-V belt tensioning device | ||
6 | Remove banjo bolt (4), remove hydraulic line (5) from power-steering pump (6) and seal openings with suitable stop plugs. | Collect escaping hydraulic fluid with an absorbent rag. | |
Banjo bolt, high-pressure line to power steering pump | |||
Record plug | |||
7 | Loosen clamp (7), detach hydraulic hose (8) from power-steering pump (6) and seal openings using suitable stop plugs. | Collect escaping hydraulic fluid with an absorbent rag. | |
Hose clamp pliers | |||
Record plug | |||
8 | Remove screws (9) and remove power-steering pump (6). | Bolt, power steering pump to crankcase | |
9 | Install in the reverse order. | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Fill hydraulic power steering and bleed. | ||
Power steering |
210 589 00 71 00
Hand pump
454 589 00 37 00
Hose clamp pliers
129 589 00 91 00
Record plug