AR46.10-W-0801A | Remove/install lock cylinder on steering wheel lock | 24.2.12 |
MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976
W54.25-1201-05
1 Transponder coil
2 Lock cylinder
S1 Drive switch
Modification notes
| Remove/install | ||
| Notes on working on the steering system in vehicles with airbag | ||
1 | Switch off ignition | ||
2 | Detach cover from steering column | ||
3 | Remove transponder coil (1) from drive switch (S1) | ||
4 | Set drive switch (S1) to position 2 | ||
5 | Turn drive switch (S1) approx. 2 mm toward position 1 using key | Hold the key in this position. | |
6 | Loosen union sleeve of lock cylinder (2) from housing by twisting it counterclockwise and clockwise | Installation: When installing, make sure that the union sleeve is installed together with the lock cylinder (2). | |
7 | Pull lock cylinder (2) out of steering wheel lock housing using the key | Installation: When the lock cylinder (2) is removed, the slot in the housing base (drive switch (S1)) can move. | |
If the slot has moved, use a screwdriver to turn the slot to position 2 and then approx. 2 mm back toward position 1. | |||
8 | Remove key and union sleeve from lock cylinder (2) | ||
9 | Install in the reverse order | ||
10 | Initialize new transponder key |