W46.10-1037-08
Shown on vehicle without code S3A (Driver airbag) |
1 | Steering wheel | 3 | Electrical connector | 5 | Screw | ||
2 | Cover | 4 | Electrical line (to right button group of multifunction steering wheel) |
Topical note | Notes on self-locking nuts and bolts | ||
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Turn steering wheel (1) to straight-ahead position | ||
2 | Switch off ignition | ||
3.1 | Remove cover (2) from steering wheel (1) | Vehicles without code S3A (Driver airbag) | |
The cover (2) is clipped onto the steering wheel (1) at four points. | |||
3.2 | Remove airbag | Vehicles with code S3A (Driver airbag) | |
4 | Disconnect electrical connection (3) and unclip electrical line (4) from brackets | ||
5 | Remove bolt (5) | Installation: Replace bolt (5) | |
Screw/bolt, steering wheel to steering column | |||
6 | Remove steering wheel (1) | Installation: The steering wheel (1) can only be installed in one position. | |
7 | Install in the reverse order |