Remove/install steering coupling

AR46.10-S-8000P

Remove/install steering coupling

26.11.2018

Model

470, 471

Shown on model 470 with code ZG3 (Engageable all-wheel drive with transmission ratio)

1

Screw

2

Steering coupling

3

Steering gear

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Remove steering shaft from steering coupling (2).

AR46.10-S-7300P

2

Remove front wheel at driver's side.

AR40.10-S-1100P

3

Remove screw/bolt (1).

 Installation: Replace bolt (1).

 Screw/bolt, steering coupling to steering gear

*BA46.10-N-1001-01P

4

Remove steering coupling (2).

 To do so, remove steering coupling (2) from steering gear (3).

 Installation: The markings(arrows) must line up.

5

Install in the reverse order.

 Steering shaft

Number

Designation

Model 470, 471

BA46.10-N-1001-01P

Screw/bolt, steering coupling to steering gear

Nm

28