P46.10-2153-11
| Remove/Install | ||
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
| Notes on battery | All models | |
Danger! | Risk of injury when carrying out test or repair work on airbag or emergency tensioning retractor units | Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. Interrupt power supply when working on such units. | |
1 | Remove steering wheel | Front wheels in straight-ahead position. | |
| Important instructions for performing repair, body work and welding on vehicles with airbags or belt tensioner units | ||
2 | Remove fanfare horns and airbag clock spring contact (A45) | ||
3 | Unclip fanfare horns and airbag clock spring contact (A45) from steering angle sensor (N49) (arrows) | Removal: Press retaining clamps outwards, lightly push onto and remove the fanfare horns and airbag clock spring contact (A45). | |
Installation: ensure that clock spring contact latches properly into place. The retaining lugs of the fanfare horns and airbag clock spring contact (A45) must rest on the retaining clamps. | |||
4 | Install in the reverse order |