Remove/install steering wheel

AR46.10-P-0100LF

Remove/install steering wheel

27.11.2018

Model

217, 222

Shown on model 222

1

Steering wheel

1s

Screw

Shown on model 222

1

Steering wheel

2

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Turn steering wheel (1) to center position.

 The front wheels must be in the straight-ahead position.

2

Remove airbag unit from steering wheel (1).

AR91.60-P-0660LF

3

Counterhold steering wheel (1) and remove bolt (1s).

 Installation: Reuse bolt (1s) and mark with a non-water-soluble pen (color dot).

 Screw/bolt, steering wheel to steering shaft

*BA46.10-P-1001-02J

If the bolt (1s) already bears a marking (color dot)



Replace bolt (1s).

4

Remove steering wheel (1) until the electrical connector (2) is accessible.

5

Release and disconnect electrical connector (2).

6

Remove steering wheel (1).

 Installation: Align recesses of the splines (arrows A) in steering wheel (1) with markings on the steering shaft.

 Model 217.### 2# , 222.### 2#
Installation: If there are double-line marks (arrows B) present on the steering shaft, match cutouts of spline (arrows A) with double-line marks (arrows B).

7

Install in the reverse order.

 Steering wheel

Number

Designation

Model 217

Model 222

BA46.10-P-1001-02J

Screw/bolt, steering wheel to steering shaft

Nm

80

80