1 Rack-and-pinion steering
2 Steering coupling
3a Bolt
3b Bolt
4 Nut
5 Nut with bracket
6 Thrust piece
7 Steering shaft
L46.10-0001-03
| Removing, installing | ||
1 | Position steering wheel and front wheels in straight ahead position | Installation: Steering wheel lock engaged. | |
2 | Remove washer fluid reservoir | Only engine 668.914 Twist locking lever and lift washer fluid reservoir. Use a screwdriver to press the washer fluid pump off the washer fluid reservoir with lines connected. | |
Check sealing ring on washer fluid pump for damage and replace if necessary. | |||
3 | Unscrew bolt (3a) from steering coupling (2) on steering shaft (7) and remove thrust piece (6) | Installation: The thrust piece (6) must lie on the flattened area on the steering shaft (7). | |
| |||
4 | Pull nut with bracket (5) off thrust piece (6) | Installation: Replace nut with bracket (5). | |
5 | Detach steering coupling (2) from steering shaft (7) | Fold top part of steering coupling downwards. | |
6 | Unscrew bolt (3b) and pull steering coupling (2) off rack-and-pinion steering (1) | Installation: | |
Turn rack-and-pinion steering to center position. | |||
Fit steering coupling (2) on rack-and-pinion steering (1). Pay attention to assembly lock (arrow). | |||
Replace self-locking nut (4). | |||
| |||
7 | Install in the reverse order |
Steering shaft