AR46.10-D-0100C | Removing and installing steering wheel | 12.2.01 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 except CODE (SA5) Driver airbag
D46.10-1119-02
1 Steering wheel
2 Padded boss
3 Bolt
4 Cable connector for signaling horn
| Remove/install | ||
1 | Unscrew padded boss (2) from steering wheel (1) | ||
2 | Turn steering wheel (1) into middle position and latch steering wheel lock into place | Wheels must be in straight-ahead position. | |
3 | Detach cable connector (4) for signaling horn on steering wheel | ||
4 | Remove screw (3) | Installation: Install new self-locking bolt (3) | |
| |||
5 | Pull steering wheel (1) off steering column | ||
6 | Install in the reverse order | ||
7 | Perform road test to check the position of the steering wheel |
Steering wheel, jacket tube, steering shaft