AR43.40-W-1500A | Measure gap | 15.6.07 |
MODEL 930, 934, 950, 952, 953, 954, 958 with CODE (BD9) Telma retarder Focal F 3300
W43.40-0005-11
1 Rear rotor
2 Stator
3 Front rotor
| Measure | ||
1 | Measure gaps between the front rotor (3) and stator (2) using feeler gauge | Measure gap at all pole plates, then form the mean value form the measurements. The mean value must be within the specified gap. | |
It must be possible to pull the feeler gauge between the front rotor (3) and the pole plates of the stator (2) under slight resistance. | |||
If the mean value or an individual measurement is outside the specified tolerance: | |||
Adjust gap. | |||
2 | Measure the gaps between the rear rotor (1) and stator (2) using a feeler gauge | Measure gap at all pole plates, then form the mean value form the measurements. The mean value must be within the specified gap. | |
It must be possible to pull the feeler gauge between the rear rotor (1) and the pole plates of the stator (2) under slight resistance. | |||
If the mean value or an individual measurement is outside the specified tolerance: | |||
Adjust gap. |
Test values for retarder (electric)
Number | Designation | Model | Model | |
BE43.40-N-1001-01A | Gap between front rotor and stator | mm | 1,7 (+0/-0,15) | 1,7 (+0/-0,15) |
BE43.40-N-1002-01A | Gap between rear rotor and stator | mm | 1,7 (+0/-0,15) | 1,7 (+0/-0,15) |