Shown on right side of vehicle |
1 | Suspension |
2 | Bolts |
3 | Elastomer bearing |
D43.40-A006-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Secure vehicle on vehicle lift. | ||
Commercially available devices/tools | |||
3 | Remove eddy current brake. | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
Do not remove electrical lines. | |||
Commercially available devices/tools | |||
M6 | |||
Nut of screw, eddy current brake holder to eddy current brake elastomer bearing holder | |||
Electrical wiring harness jack to control unit | |||
Nut, electric line to eddy current brake control unit | |||
4 | Remove respective suspension (1). | To do this, remove screws (2). | |
Installation: Check elastomer bearings (3) for condition and damage. | |||
Screw, eddy current brake elastomer bearing bracket to underbody | |||
In the case of damage, | |||
| |||
Replace affected elastomer bearings (3). | |||
Remove/install elastomer bearing of eddy current brake suspension | |||
5 | Install in the reverse order. |