AR43.30-T-0016EL | Remove/install oil temperature sensor | 12.10.11 |
MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx
MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx
MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx
MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx
T43.30-0082-11
1 Electrical line
2 Sealing ring
B93 Retarder oil temperature sensor
| Remove/install | ||
Danger! | Risk of injury caused by touching hot retarder and by scalding from hot retarder oil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure | Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder. | |
1 | Switch off ignition | ||
2 | Unplug electrical cable (1) | ||
3 | Remove retarder oil temperature sensor (B93) from retarder housing | Installation: Install new sealing ring (2). Collect any escaping oil. | |
| |||
4 | Install in the reverse order | ||
5 | Check/correct retarder oil level | ||
6 | Conduct a road test | Bleed retarder: - If present and possible: Switch off retarder foot control. -Drive vehicle at 50 km/h. - Switch on retarder in first brake times in succession for approx. 5 s each time. |
Retarder (hydraulic)