AR43.05-P-1320P | Remove/install vacuum pump | 15.2.12 |
MODEL 203.004 /006 /204 /206 /706 with ENGINE 611.962
MODEL 203.016 /216 with ENGINE 612.962
MODEL 209.316 with ENGINE 612.967
MODEL 203.018 /218 /718 with ENGINE 612.990
P43.05-0203-11
| Remove/install | ||
1.1 | Remove cylinder head cover trim | Engine 611 | |
Bolt for trim panel of cylinder head cover on cylinder head cover | |||
Screw attaching cover panel on charge air manifold | |||
2 | Detach vacuum pipe (1) at vacuum pump (2) | Squeeze catches (3) together and detach vacuum line (1). | |
3 | Remove bolts attaching vacuum pump (2) | | |
4 | Pull off vacuum pump (2) forwards. | Installation: Note position of driver on rear of pump to ensure function is maintained. Replace sealing rings, clean sealing surface in order to avoid leaks. | |
5 | Install in the reverse order |
Crankcase ventilation, cylinder head cover
Number | Designation | Engine 611.960/ | Engine 612.990 | |
BA01.20-P-1002-01A | Bolt, trim panel of cylinder head cover to cylinder head cover | Nm | 10 | 8 |
BA01.20-P-1003-01A | Bolt, charge air distribution pipe cover to charge air manifold | Nm | 10 | - |
Vacuum pump