P43.05-A012-08
1 | Vacuum pump | 2 | Bolts |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
| Remove/install | ||
1 | Remove charge air cooler. | ||
Installation: Only install upper engine cover after the leak test. | |||
2 | Remove bolts (2) . | Installation: Replace screw/bolts (2). | |
Bolt, vacuum pump to cylinder head/cylinder head cover | |||
3 | Remove vacuum pump (1) upwards. | Installation: | |
Installation: Check for correct positioning of vacuum pump driver (1). | |||
Assembly cleaner | |||
4 | Cover up opening on cylinder head using clean, lint-free rags. | ||
5 | Install in the reverse order. | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Perform engine test run; in this connection, check engine for proper operation and leak tightness. | ||
7 | Install upper engine cover. | ||
|