P43.05-2091-08
1 | Engine air intake duct upstream of the air filter | 5 | Vacuum pump | |
2 | Engine air intake duct downstream of air filter | 6 | Clips | |
3 | Vacuum hose | 11 | Shield | |
4 | Vacuum line |
11 | Shield |
22 | Bolts |
P07.02-2181-11
5 | Vacuum pump |
7 | Bolts |
P43.05-2093-06
5 | Vacuum pump |
8 | Seal |
9 | Driver |
P43.05-2092-02
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Open engine hood | ||
2 | Remove upper engine cover | ||
3 | Remove engine air intake duct upstream of the air filter (1) | ||
4 | Remove engine air intake duct downstream of the air filter (2) | ||
5 | Detach vacuum hose (3) from vacuum pump (5) | ||
6 | Unlock and pull off vacuum line (4) at vacuum pump (5) | ||
7 | Loosen rear engine mount | ||
8 | Lift and support transmission | To support the rear engine mount it is possible, for example, to use a 50x50x50 mm hard wood block. | |
9 | Detach clips (6) from shield (11) | ||
10 | Remove screw/bolts (22) | Bolt, heat shield to spacer pin bolt | |
11 | Place shield (11) to one side | ||
12 | Remove bolts (7) | Bolt, vacuum pump to cylinder head | |
13 | Remove vacuum pump (5) | Installation: Clean sealing surfaces and replace seal (8). | |
14 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
15 | Test run engine and carry out leak check |