P43.05-2088-09
1 | Vacuum pump | 3 | Bolts | |
2 | Vacuum line |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove engine charge air duct downstream of charge air cooler | ||
2 | Release and detach vacuum line (2) | ||
3 | Remove bolts (3) | Installation: Replace bolts (3). | |
Bolt, vacuum pump to crankcase or oil pump | |||
4 | Remove vacuum pump (1) | Installation: Clean sealing surfaces and replace gasket. | |
5 | Install in the reverse order |