AR42.80-W-0060A | Determine rear axle load | 23.7.09 |
MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976
except vehicles with wheel configuration 6x2, 8x2
W42.10-0048-01
1 Test balance
1 | Secure vehicle at front axle against rolling | ||
2 | Install test scale (1) into inspection pit lift | Test scale | |
Hydraulic-pneumatic inspection pit lift - over 7.0 t gotis://H_00.9_02.0 | |||
3 | Raise vehicle using inspection pit lift and test scale (1) | Only weigh vehicles with test scale (1) when unladen, as otherwise the axle housing may be damaged. | |
Only raise vehicle until wheels can turn freely. | |||
4 | Read off rear axle load on test balance (1) | On vehicles with two driven rear axles, weigh both axles. The sum of both axles is the rear axle load. | |
5 | Lower rear axle |
385 589 05 21 00
Test balance