Test and adjustment values for ALB controller
Number | Designation | Model 690.611/63/64, | Models 690.612/613, | ||
BE42.80-N-1001-01A | ALB controller pressure test | Inlet pressure | bar | 100 | 100 |
Maximum variation of outlet pressure between left and right | bar | 6 | 6 | ||
BE42.80-N-1002-01A | ALB controller linkage | Maximum deflection play of actuator rod | mm | 15 | 15 |
See picture | |||||
Test and adjustment values for ALB controller
Number | Designation | Model 690.612/613 | ||
BE42.80-N-1001-01A | ALB controller pressure test | Inlet pressure | bar | 100 |
Maximum variation of outlet pressure between left and right | bar | - | ||
BE42.80-N-1002-01A | ALB controller linkage | Maximum deflection play of actuator rod | mm | 15 |
See picture | ||||
000 589 18 31 00
Brake pedal jack
D42.10-0027-01
D42.10-0024-01
1 Bleed pressure tester (06).
2 Install brake pedal winch (07) between brake pedal and driver seat and slowly screw apart until the specified inlet brake pressure is indicated on the pressure gauge.
3 Note value of the output specifications displayed on the pressure gauge.
Possibly allow the engine to run in order to build up the required brake pressure.
4 Loosen brake pedal winch (07).