1 | Cover |
2 | Boot |
3 | Cap |
4 | Screw |
5 | Screw |
6 | Compressed air connections |
7 | Retaining plate |
8 | Bolts |
9 | Compressed air lines |
14.01 | Parking brake valve without trailer control |
14.02 | Parking brake valve with trailer control |
14.08 | Parking brake valve without trailer control + pipe fracture protection |
14.09 | Parking brake valve with trailer control + pipe fracture protection |
W42.60-1266-06
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Remove | ||
1 | Secure vehicle against rolling | ||
2 | Fully drain compressed air system | ||
3 | Switch off ignition | ||
4 | Remove boot (2) | Mounting wedge | |
5 | Remove caps (3) in the paneling (1) and remove screws/bolts (4) | ||
6 | Remove cover (1) | ||
7 | Remove screw/bolts (5) | ||
8 | Pull parking brake valve (14.01, 14.02, 14.08, 14.09) out of bracket and unscrew screws/bolts (8) | ||
9 | Remove retaining plate (7) | ||
10 | Remove parking brake valve (14.01, 14.02, 14.08, 14.09) upward | ||
| Install | ||
11 | Install parking brake valve (14.01, 14.02, 14.08, 14.09) from top | ||
12 | Mount retaining plate (7) on parking brake valve (14.01, 14.02, 14.08, 14.09) | Replace O-rings. | |
13 | Screw in bolts (8) | ||
14 | Screw in bolts (5) | ||
15 | Start engine and completely inflate air brake system with idle speed | ||
16 | Switch off ignition | ||
17 | Check compressed air lines (9) for leaks | Leak detection spray | |
18 | Install cover (1) | ||
19 | Screw in screws/bolts (4) and install caps (3) in the paneling (1) | ||
20 | Install boot (2) |
110 589 03 59 00
Mounting wedge