1 | Cover |
2 | Instrument cluster covering |
3 | Screw |
4 | Trim |
5 | Screw |
6 | Compressed air connections |
7 | Retaining plate |
8 | Bolts |
9 | Compressed air lines |
10 | Center module |
A9 | Truck Control Center (TCC) |
A12 | Heating/ventilation control and operating unit |
A43 | Modular switch panel (MSF) control unit |
A44 | Instrument panel switch module 1 |
A45 | Instrument panel switch module 2 |
A46 | Instrument panel switch module 3 |
14.01 | Parking brake valve without trailer control |
14.02 | Parking brake valve with trailer control |
14.08 | Parking brake valve without trailer control + pipe fracture protection |
14.09 | Parking brake valve with trailer control + pipe fracture protection |
W42.60-1219-05
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Remove | ||
1 | Secure vehicle to prevent it moving away. | ||
2 | Drain compressed air system completely. | ||
3 | Engage parking brake. | ||
4 | Switch off ignition. | ||
5 | Remove instrument cluster cover (2). | Mounting wedge | |
6 | Remove Truck Control Center(TCC)(A9). | ||
7 | Remove ventilation heating control and operating unit(A12). |
| |
8 | Remove modular switch panel (MSF) control unit (A43). | ||
9 | Remove instrument panel switch module (A44, A45, A46). | ||
10 | Remove cover (1). | Mounting wedge | |
11 | Unscrew screw (3) and remove trim (4). | ||
12 | Remove center module (10). |
| |
Vehicles with code F2B (Floor version, tunnel 170 mm) | |||
Vehicles with code F2C (Floor version, tunnel 320 mm) | |||
13 | Unscrew screws (8) and remove retaining plate (7). | ||
14 | Remove screws (5) and lift off parking brake valve (14.01, 14.02, 14.08, 14.09). | ||
| Install | ||
15 | Insert parking brake valve (14.01, 14.02, 14.08, 14.09) and fix in place with screws (5). | ||
16 | Position retaining plate (7) on parking brake valve (14.01, 14.02, 14.08, 14.09) and fix in place with screws (8). | Replace O-rings. | |
17 | Insert trim (4) and fix in place with screw (3). | Mounting wedge | |
18 | Install cover (1). | Mounting wedge | |
19 | Install instrument panel switch module (A44, A45, A46). | ||
20 | Install modular switch panel (MSF) control unit (A43). | ||
21 | Install ventilation heating control and operating unit(A12). |
| |
22 | Install Truck Control Center(TCC)(A9). | ||
23 | Install instrument panel cover (2). | Mounting wedge | |
24 | Start engine and completely fill compressed-air system at idle speed. | ||
25 | Switch off engine. | ||
26 | Release parking brake. | ||
27 | Check compressed-air lines (9) for leak tightness. | Leak detection spray | |
Leakage detection spray for USA | |||
28 | Install center module (10). |
| |
Vehicles with code F2B (Floor version, tunnel 170 mm) | |||
Vehicles with code F2C (Floor version, tunnel 320 mm) |
110 589 03 59 00
Mounting wedge