P42.45-2399-11
1 Tandem brake master cylinder
10 Brake fluid expansion reservoir
34a Electrical connector
B34/1 ESP brake pressure sensor 1
| Remove/install | ||
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | ||
| Notes on repairs to brake system | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open engine hood and raise to vertical position | ||
2 | Suction off brake fluid from the brake fluid reservoir (10) | ||
3 | Disconnect electrical connector (34a) from ESP brake pressure sensor 1 (B34/1) | ||
4 | Detach ESP brake pressure sensor 1 (B34/1) from tandem master brake cylinder (1) | Collect brake fluid which runs out with an absorbent rag or in a suitably marked container. | |
| |||
5 | Install in the reverse order | ||
6 | Bleed brake system | ||
| |||
7 | Check fluid level in brake fluid reservoir (10) and correct if necessary | ||
| Brake system - inspect fluid level | ||
8 | Read out fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
9 | Check brake system for leaks |
Electronic Stability Program (ESP)
Number | Designation | Model | ||
BA42.45-P-1007-01B | Brake pressure sensor to master brake cylinder | Nm | 25 | |
Brake fluid