Remove/install electronic brake control (EBS) control unit

AR42.25-W-2000AC

Remove/install electronic brake control (EBS) control unit

15.08.2012

MODEL

930, 932, 933, 934

A3

Drive control (FR) control unit

A11

Brake system (BS) control unit

A111

Active Brake Assist (ABA) control unit



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Connect Star Diagnosis, start Xentry Diagnostics and perform a quick Check

 Only if the brake control (BS) control unit (A11) is replaced.

2.1

Select "Control unit replacement" and follow the instructions

If the brake control (BS) control unit (A11) is replaced.

 Control unit replacement is completely menu-assisted under:
 "Brake control (BS)"
 "Control unit adaptation"
 "Control unit replacement"

 Installation:Follow "Control unit replacement" instructions.

2.2

Switch off ignition

If the brake control (BS) control unit (A11) is not replaced.

3

Remove footwell cover on front passenger side

AR68.30-W-1300MP

4

Disconnect electrical connections on brake control (BS) control unit (A11)

5

Remove brake control (BS) control unit (A11)

6

Install in the reverse order