1 | Brake shoes |
2 | Pressure springs |
3 | Lower extension spring |
4 | Thumbwheel |
5 | Upper extension spring |
6 | Expanding lever |
7 | Armature pin |
S42.20-4530-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on repairs to brake system | ||
| Remove/install | ||
1 | Connect vehicle diagnosis system and move parking brake into assembly position. | Model 447.8, 448.8 | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
To do so, follow the procedure in the menu "Electric parking brake (EFB) control unit". | |||
2 | Remove respective brake disk on rear axle. | ||
3 | Unhook pressure springs (2). | ||
4 | Unhook lower draw spring (3). | Removal and installation tool | |
5 | Remove brake shoes (1) with adjustment wheel (4) and upper draw spring (5). | Installation: Clean surfaces of brakepads on brake shoes (1) by roughening up slightly with abrasive cloth. | |
6 | Remove expanding lever (6) from brake cable. | To do so, press out the armature pin (7). | |
Installation: Ensure that expanding lever (6) is installed correctly. Lightly grease the contact surfaces of the expanding lever (6), brake shoes (1) and armature pins (7). | |||
Long-life grease | |||
| Check | ||
7 | Check condition of brake linings on brake shoes (1). | Brake lining thickness | |
If undersize or cracks are present, | |||
| |||
Replace the brake shoes (1) on both sides of the vehicle. | |||
8 | Install in the reverse order | ||
9 | Adjust parking brake. |
| |
Model 447.6/7, 448.7 |
116 589 01 62 00
Removal and installation tool