S42.20-0049-09
1 Rear brake control cable
2 Reversing lever
3 Return spring
4 Brake shoe operating lever
5 Anchor bolt
6 Brake control cable guide on body
7 Adjusting screw
| Removing, installing | ||
1 | Set vehicle to service mode | With code CL0 (air suspension) | |
Danger! | Danger of fatal injury due to slipping or tipping of vehicle off lifting platform | Align vehicle between lifting platform columns and position the four support plates at the lifting platform support points prescribed by the vehicle manufacturer | |
2 | Raise vehicle | ||
| Notes on lifting and jacking-up | Model 638 | |
3 | Slacken off rear parking brake control cables (1) with adjusting screw (7) | ||
4 | Remove parking brake shoes | ||
5 | Disengage rear brake control cables (1) at automatic cable length compensation | ||
6 | Detach rear brake control cables (1) from brake control cable guide on body (6) | Installation: Replace cable strap | |
7 | Detach anchor bolt from brake shoe operating lever and guide rear brake control cable out of semi-trailing arm | ||
8 | Install in reverse order | ||
9 | Adjust parking brake |