P42.20-2776-08
1 | Electrical connector | M76/1 | Left electric parking brake actuator motor | |
2 | Bolts | M76/2 | Right electric parking brake actuator motor | |
3 | Sealing ring |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Lift vehicle with lifting platform. | ||
2 | Move brakepad on rear axle into assembly position. | ||
3 | Release electrical connector (1), disconnect it then place it to one side. | ||
4 | Remove bolts (2) and remove let electric parking brake actuator motor (M76/1) or right electric parking brake actuator motor (M76/2). | Installation: Replace sealing ring (3). | |
Bolt, actuator motor to brake caliper | |||
5 | Install in the reverse order. | ||
Concluding tasks | |||
6 | Perform brake test on test stand. | ||
|