1 | Brake shoes |
2 | Return spring |
3 | Expanding springs |
4 | Return spring |
5 | Return spring |
6 | Cable coupler |
7 | Brake carrier |
D42.20-1130-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Remove/install | ||
1 | Remove respective brake disk on rear axle. | ||
2 | Unhook front brake cable at brake compensator lever. | Do not detach the rear brake cables. | |
3 | Remove retracting spring (2). | Removal and installation tool | |
4 | Unhook expanding springs (3). | Use a cross-head screwdriver (size 3). | |
5 | Remove retracting springs (4, 5). | Removal and installation tool | |
6 | Remove brake shoes (1). | Installation: Make sure that the cable coupler (6) moves easily. Clean contact surfaces on brake carrier (7) and grease lightly. | |
Long-life grease | |||
| Check | ||
7 | Check brake shoes (1) for wear. | Minimum dimension for brake shoes incl. carrier plate | |
If a brake shoe (1) exhibits undersize or crack formation. | |||
| |||
Replace brake shoes (1) on both sides of the vehicle. | |||
8 | Check brake adjuster. | Check brake adjuster for ease of movement and seal for damage. | |
If corresponding findings are present, | |||
| |||
replace brake adjuster or seal. | |||
9 | Install in the reverse order | ||
10 | Adjust parking brake. |
116 589 01 62 00
Removal and installation tool