Shown on model 907, left side of vehicle |
1 | Brake shoe |
2 | Pressure spring |
4 | Brake cable lock |
5 | Rear retracting spring |
6 | Brake adjuster |
D42.20-1170-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on repairs to brake system | ||
| Remove/install | ||
1 | Remove respective brake disk on rear axle. | ||
2 | Unhook front brake cable at brake compensator lever. | Do not detach the rear brake cables. | |
3 | Unhook rear retracting spring (5). | Removal and installation tool | |
4 | Remove expanding springs (2). | Installation tool | |
5 | Remove brake shoes (1) with brake adjuster (6). | Installation: Ensure correct installation position of brake cable lock (4). | |
Installation: Check brake cable lock (4) or brake adjuster (6) for ease of movement and damage. | |||
Long-life grease | |||
If corresponding findings are present, | |||
| |||
Replace brake cable lock (4) or brake adjuster (6). | |||
6 | Slightly roughen surfaces of brakepads of brake shoes (1) and clean. | If the brake shoes (1) are reused. | |
Commercially available devices/tools | |||
Assembly cleaner | |||
| Check | ||
7 | Check brake shoes (1). | Minimum dimension for brake shoes incl. carrier plate | |
If a brake shoe (1) exhibits undersize or crack formation. | |||
| |||
Replace brake shoes (1) on both sides of the vehicle. | |||
8 | Install in the reverse order | ||
9 | Adjust parking brake. |
116 589 01 62 00
Removal and installation tool
112 589 09 61 00
Installation tool