1 | Return spring |
2 | Brake shoe |
3 | Wedge unit |
4 | O-ring |
W42.10-1037-11
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
| Remove/install | ||
1 | Remove brake drum. | ||
2 | Unhook both retracting springs (1) and swivel brake shoes (2) outward. | Installation: Hook retracting springs (1) with the right-angle bend towards the axle tube. | |
3 | Remove combination brake cylinder. | ||
4 | Remove wedge unit (3). | ||
5 | Remove O-ring (4) from brake carrier. | Installation: Replace O-ring(4). | |
6 | Install in the reverse order. |