1 | Brake caliper |
2 | Retaining ring |
3 | Bellows |
4 | Brass bushing (fixed bearing) |
5 | Pilot bushing (fixed bearing) |
6 | Pilot bushing (loose bearing) |
7 | Pilot bushing (loose bearing) |
8 | Hexagon adapter |
11 | Dust cap |
12 | Dry liner |
13 | Thrust piece with CV boot |
14 | Brake wear sensor |
W42.10-1178-06
| Notes on tool combinations for repairs on the brake caliper | ||
| Remove | ||
1 | Remove brake carrier with brake caliper (1) | ||
2 | Remove brake caliper (1) from brake carrier. | ||
| Disassemble | ||
3 | Remove retaining ring (2) | ||
4 | Remove bellows (3) and pilot bushings (5, 6) | ||
5 | Remove pilot bushing (7) from floating bearing | ||
6 | Remove brass bushing (4) on fixed bearing | ||
| Assemble | ||
7 | Install brass bushing (4) onto fixed bearing and caulk | ||
Installation grease (white) part number: II 14525 | |||
8 | Install pilot bushing (7) onto floating bearing | ||
Installation grease (white) part number: II 14525 | |||
9 | Install pilot bushings (5, 6) and bellows (3) | ||
| Install | ||
10 | Mount brake caliper (1) onto brake carrier | ||
11 | Install brake carrier with brake caliper (1) |