T42.10-0031-11
1 Rivet
2 Brake pad
3 Brake shoe
| Removing | ||
1 | Remove brake shoes (3) | ||
2 | Drill the closing heads of the rivets (1) | The brake linings (2) of all brake shoes (3) of an axle should always be replaced. | |
3 | Detach brake linings (2) from the brake shoes (3) | ||
| Checking | ||
4 | Check contact surface of brake linings (2) on brake shoes (3) | Worn brake shoes (3) should be replaced. | |
| Install | ||
5 | Rivet new brake linings (2) onto the brake shoes (3) | ||
| Guidelines for riveting brake linings | All models | |
| Notes on running in new brake pads/linings | All models | |
| |||
| |||
| |||
6 | Install brake shoes (3) |
Commercially available tools