T42.10-0032-01
1 Upper retracting spring
2 Pulley
3 Brake shoe
| Remove/install | ||
Danger! | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; shield off hazard area if necessary. | |
1 | Remove brake drum | ||
2 | Unhook upper retracting spring (1) and both lower retracting springs | Removal: The two brake shoes are held together by the retracting springs and therefore they must be secured against dropping down during the removal process using the brake spring hook , e.g. with a tensioning strap. | |
Installation: | |||
3 | Remove brake shoes (3) from brake carrier | The wheel brake assembly is mounted on the brake carrier. The brake carrier can be completely removed with the brake camshaft and brake shoes. | |
4 | Remove rollers (2) from brake shoes (3) | Removal: - Remove one of the two retaining rings on the pin. - Pull pin out of brake shoe (3) and remove roller. | |
5 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |