1 | Protective cap |
2 | Nut |
3 | Brake drum |
S42.10-4540-11
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | |
Topical note | Notes on repairs to brake system | ||
| Remove/install | ||
1 | Remove relative rear wheel | ||
2 | Remove protective cap (1) | Installation: Replace protective cap (1). Ensure that the protective cap (1) is seated properly. | |
3 | Unscrew nut (2) | Installation: Replace nut (2). | |
Nut, wheel hub | |||
4 | Remove brake drum (3) | ||
| Check | ||
5 | Check brake drum (3) for correct diameter, wear and damage; replace if necessary | Brake drum diameter | |
6 | Check condition and lining thickness of brake shoes | ||
| Check brake lining thickness | ||
If necessary, replace brake shoes. | |||
| Clean | ||
7 | Clean brake drum (3), steering knuckle and brake shoes | Installation: | |
Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |||
8 | Install in the reverse order | ||
9 | Adjust drum brake | ||
In case of uneven braking effect, check automatic adjuster and replace if necessary: | |||
| |||
Install, remove automatic brake adjuster |