Shown on model 470, on left side of vehicle |
1 | Brake disk |
2 | Wheel hub |
S42.10-4619-11
Danger | Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on repairs to brake system | ||
| Remove | ||
1 | Remove front wheel | ||
2 | Mark position of brake disk (1) relative to wheel hub (2) in color | When reusing the brake disk (1). | |
3 | Remove brake caliper with attached brake hose from brake caliper support and fasten to vehicle | ||
4 | Remove brake caliper support | ||
5 | Remove brake disk (1) | ||
| Clean | ||
6 | Clean contact surfaces and interference fit of brake disk (1) | Assembly cleaner | |
| Install | ||
7 | Check brake disk (1) for damage and wear | ||
| |||
If the brake disk (1) is damaged or worn. | |||
| |||
Replace both brake disks (1) on front axle. | |||
8 | Align brake disk (1) to match the colored marking relative to the wheel hub (2) | When reusing the brake disk (1). | |
9 | Plug brake disk (1) onto wheel hub (2) | ||
10 | Install brake caliper support | ||
11 | Install brake disk | ||
12 | Mount front wheel |