P42.50-2027-09
1 | Seal | 7 | Charge piston unit | 13 | Brake line | ||
2 | Screw | 8 | Cable | 14 | Brake lines | ||
3 | Cover | 9 | Hose | 15 | Bracket | ||
4 | Brake pedal | 10 | Reservoir | A7/6 | Brake booster hydraulic unit | ||
5 | Pin | 11 | Connection | S9/1 | Stop lamp switch | ||
6 | Fuse | 12 | Screw |
| Remove/install | ||
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Brake fluid notes | |||
Notes on repairs to brake system | |||
1 | Switch off ignition | ||
2 | Reduce pressure in pressure reservoir | Fully depress brake pedal 30 times as far as the stop. | |
3 | Remove mechanical brake light switch (S9/1) | ||
4 | Remove cover (3) | ||
5 | Pull out retainer (6) and pin (5) | ||
6 | Remove wiper system | ||
7 | Suction off brake fluid from reservoir (10) | ||
8 | Remove bracket (15) | ||
9 | Detach connection (11) | ||
10 | Detach hoses (9) and line (8) from reservoir (10) | Collect brake fluid which runs out in a suitable container. | |
11 | Remove screw/bolt (12) | ||
12 | Pull reservoir (10) out of brake booster hydraulic unit (A7/6) | ||
13 | Detach brake lines (14) | Brake line to hydraulic unit for brake booster | |
14 | Detach cable (8) from charging piston unit (7) | Brake line to charging piston unit | |
15 | Release brake line (13) | Brake line to hydraulic unit for brake booster | |
16 | Remove bolts (2) | Bolt, brake booster hydraulic unit to firewall | |
17 | Detach brake line (13) | Push the brake booster hydraulic unit (A7/6) toward the driver side. | |
18 | Lift out brake booster hydraulic unit (A7/6) | Installation: Install new seal (1). | |
19 | Install in the reverse order | ||
20 | Bleed brake system |