Shown on model 177.087 |
1 | Brake fluid reservoir |
2 | Cap |
P42.10-3207-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on repairs to brake system | ||
Topical note | Notes on handling, transport and storage of composite brake disks | ||
Topical note | Brake fluid notes | ||
Notes on safety-relevant components | |||
| Remove | ||
1 | Clean area around cap (2) of brake fluid reservoir (1). | Assembly cleaner | |
2 | Unscrew cap (2) of brake fluid reservoir (1). | ||
Bleeding | |||
3 | Fill brake fluid reservoir (1) with new brake fluid up to maximum mark. | ||
| Brake fluids (DOT 4 plus) | ||
| General brake fluid | ||
4 | Connect filling unit to brake fluid reservoir (1). | ||
| 000 588 01 82 00 Filling unit | ||
| General brake fluid | ||
| Brake fluids (DOT 4 plus) | ||
Pay attention to manufacturer's operating instructions. | |||
5 | Switch on filling unit. | ||
6 | Lift vehicle with vehicle lift. | ||
7 | Bleed the system. | ||
| 000 588 01 82 00 Filling unit | ||
Vent screw on brake caliper (floating brake caliper) | |||
Bleed screw at brake caliper | |||
8 | Switch off filling unit and disconnect from brake fluid reservoir (1). | ||
| 000 588 01 82 00 Filling unit | ||
9 | Check brake system for leaks. | ||
10 | Correct fluid level in brake fluid reservoir (1). | ||
| |||
| Install | ||
11 | Seal brake fluid reservoir (1) with cap (2). | ||
12 | Lower vehicle with vehicle lift. |